KRK Classic 5 Monitor Pack - Studio Monitors - 2 Pieces

The Classic Monitor 5 is a listening set that includes a pair of KRK Classic 5 studio monitors, two XLR(m) to XLR(f) signal cables, two power cables, and a pair of foam isolation pads with elevation.

This set is ideal for professional studio monitoring, home studios, music production, post-production AV studios, dubbing, broadcasting stations, and other sound productions.

• Classic 5 Monitor Pack set
• Pair of Classic 5 monitors
• Two XLR-XLR signal cables
• Two power cables
• Pair of foam isolation pads with elevation
• Classic 5 monitors
• Bi-amp amplifier with low distortion
• Power output of 50W (30W + 20W)
• 5" bass woofer, 1" tweeter
• Input connectors - XLR, TRS 6.3, and RCA
• Bass and treble controls
• Volume adjustment

The monitor set of two active monitors, cables, and pads allows you to instantly install professional monitoring in your home or professional studio. With the provided cables, you can connect the monitors symmetrically to any professional monitor controller, mixer, or audio interface.

KRK Classic 5 monitors
are a reimagining of one of the best-selling studio monitors, the Rokit 5G3. The third generation of Rokits, from which the Classic 5 is derived, brought numerous innovations compared to its predecessors. These include a redesigned A/B class amplifier with higher power, lower distortion, and noise. Another significant improvement is the new high-frequency tweeter, which delivers cleaner sound with a range up to 35 kHz. The cabinet design has also been modified, addressing issues of unwanted diffraction and resonance with rounded edges. The redesigned bass reflex enhances and emphasizes the lowest frequencies. As a result, the monitors provide a more precise frequency response and richer stereo image.

High-quality signal cables
With two high-quality XLR(m) to XLR(f) symmetrical cables, you can connect the monitors to any monitor controller, mixer, or audio interface. The cables ensure the highest possible sound quality with reduced external interference.

Foam isolation pads
The set also includes two foam pads. These allow you to place the monitors on a desk, monitor stands, elevated parts of the mixer, or on other monitors without causing resonance and interference between the monitor and the pad. This achieves precise and accurate reproduction of the Classic 5 monitors without any disruptive influences.

Features of the Classic 5 monitors

• Two-way active monitor
• A/B type amplifier
• Bi-amping
• Crossover frequency: 2.6 kHz
• Distortion (THD+N): < 0.1% THD+N (across the entire frequency range)
• Signal-to-noise ratio: >94 dB
• Input connectors:
  • Unbalanced: RCA (cinch)
  • Balanced: TRS 6.3 (large jack), XLR (canon)

*When connecting a TS (mono jack) connector to the TRS input, you achieve an unbalanced connection

• Input sensitivity:
  • Balanced: 0 dBu
  • Unbalanced: -15 dBV
• Input impedance:
  • Balanced: 10 kΩ
  • Unbalanced: 7 kΩ
• Power (per monitor)
  • Total: 50 W
  • Bass: 30 W
  • Treble: 20 W
• Drivers
  • Woofer: 5” with Glass Aramid membrane
  • Tweeter: 1” with silk dome
• Frequency response
  • 56 Hz - 30 kHz (+/- 3 dB)
  • 46 Hz - 34.5 kHz (-10 dB)
• Peak acoustic pressure SPL: 101 dB
• Maximum acoustic pressure SPL: 98 dB
• Controls:
  • Volume: -30 dB to +6 dB
  • Bass (200 Hz and below): -1 dB, FLAT, +1 dB, +2 dB
  • Treble: (2.6 kHz and above): -2 dB, -1 dB, FLAT, +1 dB
• Power supply:
  • Internal power supply
  • Voltage: 120 - 240 V

Package includes

• Pair of Classic 5 monitors
• Pair of symmetrical XLR(m) to XLR(f) signal cables
• Two power cables
• Pair of foam isolation pads